| Subtotal | $0.00 |
|---|---|
| Total | $0.00 |
After replace the screen,if you find there is no functions,you need to do EDC damper statellite coding.This instruction show you guide on how to use Launch X431 PAD VII to perform ZBE/CON controller EDC damper satellite coding for for BMW 530e G30.For more repair case of BMW,please check BMW Trouble Repair.
Tool You Need:
https://vsst247.com/bmw-retrofits
https://vsst247.com/bmw-remote-programming-coding
Procedures:
Connect Launch X431 PAD VII to BMW 530e
Then power on Launch X431 PAD and automatically search vehicle identification
After scanning,go to “Coding/Program” option
Select “Coding”
It show the vehicle information,press “Next”
Scroll down to select “ZBE/CON(Controller)”
Select “S15A-18-07-546”,then wait coding processing
Recoding has been completed
Now go to system list to check the DTC in ZBE/CON controller,you will find there is no DTC.
https://vsst247.com/bmw-navigation-fsc-code
https://vsst247.com/bmw-apple-carplay-fsc-service
#BMW530e #G30ZBE/CONController #BmwNavigationFSCcode #BmwAppleFSCservice
Thank For 
BMW Diagnostic Software BMW ISTA+ BMW ISTA-D BMW ISTA-P Esys
68 D. No. 60, An Phu, District 2, Ho Chi Minh City 
