| Subtotal | $0.00 |
|---|---|
| Total | $0.00 |
Here show you guide on how to replace engine coolant temperature sensor for Chevroelt Avio. More repair case for Chevrolet,please refer to Chevrolet Trouble Repair
Related Contents:
Procedures
Remove procedures
Note: Use care when handling the ECT sensor. Damage to the sensor will affect the proper operation of the fuel injection system.
1.Relieve the coolant system pressure and remove the coolant.
2.Disconnect the battery negative cable.
3.Disconnect the engine coolant temperature (ECT) sensor connector (1).
4.Carefully remove the ECT sensor (2).
Installation Procedure
1.Install the ECT sensor (2) and tighten to 17.5 N·m (12.9 lb ft).
2.Connect the engine coolant temperature (ECT) sensor connector (1).
3.Connect the battery negative cable.
4.Fill the cooling system.
#EngineCoolantTemperature #SensorReplacementGuide #ServiceFORD #FordincodeCalculator
Thank For 
Mercedes Benz Diagnostic new car 2022+
Software Version Management (SVM) VAG Group
Mercedes Benz Instrument Cluster Renew
BMW Diagnostic Software BMW ISTA+ BMW ISTA-D BMW ISTA-P Esys
68 D. No. 60, An Phu, District 2, Ho Chi Minh City 
