Shopping Cart

Subtotal $0.00
Total $0.00

How to Connect Scania VCI Interface to CAN


Here show the main step of connect to CAN via Scania VCI interface and connect ECU the user performs the following steps.



1) When using a VCI3 remote connection.Please refer to:How to Connect Scania VCI3 to Scania Network or AdHoc

2) Start XCOM application

3) Connect to CAN by either

Select the menu choice File -> Connect to CAN

Press the ”F4”key

Press the keys ”shift”and ”F4”

4) If the user has the option setting ”display the select ECUs” is enabled the ”Select ECUs” dialog will be displayed. If the shift + F4 were pressed the dialog will always be displayed.


5) In the ”Select ECUs” dialog the user can either…

Scan for all ECUs available on CAN (a functional SetSession KWP command will be transmitted on CAN) by selecting the radio button choice ”Connect to all ECUs on CAN”and pressing the OK-button

Scan for those ECUs that has the check mark set in the list (a physical SetSession KWP command will be transmitted to the marked ECU’s CAN addresses) by selecting the ”I select myself”radio button choice and press the OK-key.

If there are more than one VCI connected to the computer the user can select which VCI to use when connecting to ECUs. The VCI ID can be found on the back of the VCI.

6) The application now connects to CAN via KWP.

7) If the application detects ECUs with invalid configuration, a message box will be displayed to query the user whether to allow the application to correct the ECU or not. Pressing ”yes” will do the modification (recommended) and ”no” will proceed the connect sequence without any action.


8) The sequence is now complete and the connected ECUs are shown in the ECUs menu and in the ECU explorer tree.

#fordf150retrofitheadlights #fordfiestaretrofitheadlights #fordfiestaretrofitcruisecontrol #fordretrofitelectric #fordincodecalculator #fordbcmincode #howtogetfordincode #fordidslogin #fordidssupport #fdrsforddiagnostic #odisengineeringdownload #odisengineeringlongcoding #odisengineeringlogincode #odisengineeringadaptation #volkswagenimmobilizerdelete #volkswagenimmobilizerbypass #audiecuimmobilizerremoval #audiimmobilizerprogramming #audiretrofitambientlighting #audiretrofitandroidauto #audiretrofitapplecarplay

Thank For donatepaypal

VAG Retrofit

Price: $100.00 $120.00
Watch Now

Ford PATS Key Programming

Price: $40.00 $55.00
Watch Now


Price: $75.00 $90.00
Watch Now

Mercedes Benz Diagnostic new car 2022+

Price: $150.00 $185.00
Watch Now

BMW Retrofits

Price: $50.00 $64.00
Watch Now

Jaguar Land Rover Retrofit

Price: $100.00 $120.00
Watch Now

Activate Design AMG For Cluster

Price: $100.00 $120.00
Watch Now


Price: $50.00 $64.00
Watch Now

BMW Coding and Programming

Price: $50.00 $64.00
Watch Now

Related Posts

BMW E Series Secondary Air System Failure Analysis Guide

Cadillac CT6 Shake Slightly When Accelerating Solution

Volvo EC200D Excavator Engine Removal Guide

Audi A5 2014 ECU Online Long Coding by Launch X431 PAD V

DiagProg 4 Correct Odometer & Clear DTCs for Audi A8 S8

Nissan Maxima 2017 Idle Air Volume Learning by Launch X431 Throttle