| Subtotal | $0.00 |
|---|---|
| Total | $0.00 |
Openport 2.0 adapter is capable of communicating with most OBDII compliant vehicle with standard J2534.Here car-auto-repair.com show you guide on how to install and configure driver for Openport 2.0 J2534.
Procedures:
Connect USB cable to laptop and Openport 2.0 adapter
Then your PC will prompt you find a unknown device
Go to “Device Manager” to check there with a yellow exclamation mark
Double click “openport2_setup_1024791.exe” from download link file
Click “Next” to cotinue
Click “I Agree”
Setup will install OpenPort 2.0 J2534 Drivers in the following folder.(Record the folder driver installed)
To install in a different folder,click “Browse” and select another folder
Here click “Next” to continue
Finish driver installation
Now back to “Device Manager”
Double click “OpenPort 2.0” with yellow exclamation mark
Click “Browse to select local driver”
Now here you need select the driver folder you install before (record before)
Then click “OK” to load driver
After then just wait process
Done
Now back “Device Manager” to check the status,the yellow exclamation mark disappear
Finish!
You can run related software for OpenPort 2.0,like Benz Xentry,MUT-III..
#InstallDriverandConfigure #OpenportJ2534 #VagRetrofit #ServiceVAG
Thank For 
Porsche Retrofit And Disable/Enable Option
Mercedes Benz Instrument Cluster Renew
Offline Coding & Programing with DAS
Software Version Management (SVM) VAG Group
Activate Design AMG For Cluster
68 D. No. 60, An Phu, District 2, Ho Chi Minh City 
